Golf Ferrules 10-Pack / 2-Line / 335 350 355 370

Please let us know your desired TIP diameter after purchase.
335, 350, 355, or 370
__________________
TIP Diameter / (Outer Diameter x Inner Diameter x Height)
TIP Diameter 335 / 13.5 x 8.6 x 15mm
TIP Diameter 350 Short / 13.4 x 8.9 x 16mm
TIP Diameter 350 Long / 13.4 x 8.9 x 22mm
TIP Diameter 355 / 13.5 x 9.1 x 16mm
TIP Diameter 370 / 13.6 x 9.5 x 19mm
__________________
*This listing is for a set of 10 pieces of the same type and size.
*If the type or size is not the same, there will be an additional charge of 200 yen.

[Material]
High-quality celluloid

[Tip Diameter]
For steel shafts, carbon shafts, tapered or parallel shafts, etc., please refer to the specifications published by the shaft manufacturer when pressing in.
___________________

—□■ How to Choose a Ferrule ■□—
① Determine the outer diameter of the ferrule.
Measure the hosel diameter and choose a size that is approximately +0.2mm larger.
→ For a clean finish, shave it down to eliminate any step and finish with acetone.
② Determine the inner diameter of the ferrule.
Choose based on the TIP diameter in the specifications table published by the shaft manufacturer you will be using.
→ Generally, insert and bond a ferrule that is about 0.1mm smaller than the inner diameter.
③ Determine the design and height of the ferrule.
___________________
*Please choose the appropriate ferrule to ensure a clean connection between the shaft and the head.
*While ferrules are decorative parts, if they shift upwards, there is a possibility of the head coming off. Please check.
*If you have difficulty choosing, please consult a workshop or craftsman.
*All work is done at your own risk.

　＝　＝　＝　＝　＝
→ We cannot answer questions such as I will use this for XX, is it compatible? Please make your own judgment.
　＝　＝　＝　＝　＝

Ferrule Cell Shaft Sleeve
Iron Utility Wedge
Driver Spoon 3W 5W UT

▼▼▽▼▼▽▼▼▽▼▼
Please be sure to check your profile before purchasing.