Balloon Dolly / BEE Surf Dolly 2B <12-inch> Series

This is a BEE boat balloon dolly.
It was used with a Joycraft Kayak 340sp.
Installation image is also included.

◾️Notes
Please prepare your own bolts for attaching to the boat.

With large diameter balloon tires / BEE Surf Dolly 2B <12-inch Balloon> Series

[Product Details]
Won't sink even on sandy beaches!
BEE aluminum, lightweight Surf Dolly 2 equipped with 12-inch balloon tires.
Comes as a set of two (left and right).


2 balloon tires, 2 main shafts, 2 spacers for tire axle shafts, 2 tire axle shafts, 2 tire fixing pins, 2 washers

*Please attach the washers to the outside of the tires.


Shaft length: 60cm
Outer diameter: 30cm
Tire width: 16cm (measured at the narrowest part)
Axle diameter: 25.4mm
Weight: 7.2kg
Air pressure: 0.2 Bar / 3 PSI
Load capacity per tire: 55kg
Compatible with L-shaft for transom length and engines.


- Red anodized color
- The slightly longer 60cm shaft is long enough not to hit the rear tube of an inflatable boat, allowing it to be attached to the outside of the transom.
- Compatible with FRP and aluminum boats.
- Uses lightweight aluminum shaft.

- The shaft can be moved up and down using the handle.
- 4-stage tilt angle.
- Also compatible with cartop aluminum boats.
- The mounting base is fixed to the transom.
- To prevent transport issues, please inflate the tires upon arrival.

*Be careful not to overinflate the tires, as they may expand excessively and not return to their original shape.

Thank you for looking.