For Koyo-sama only ■ IO Data SATA HDD Case USB 3.0/2.0

★Case only. HDD not included.
3.5-inch SATA drive case with USB 3.0 port, includes power adapter.

- Original Model Number: HDCL-UT series
- Type: Drive case for 3.5-inch HDD
- Connection Method: USB
- Accessories: Power adapter, cable, 3 screws (2 for HDD mounting, longer screw for mounting the circuit board to the case),
　Paper showing names and specifications of each part. Same as pictured.
- Internal Port: SATA connection
- External Port: USB 3.0/2.0 port

【Notes】
・This is a used item. It was used for approximately 8 years.
・It originally contained a 2TB Western Digital 3.5-inch HDD.
・I tested it with a 6TB Western Digital HDD and it was recognized without any problems.
・I did not measure the transfer rate, but BS high-definition programs played back without any issues.
・The access lamp is blue for 3.0 and green for 2.0. I have not tested with USB 2.0. All descriptions are based on USB 3.0.
・The item will be shipped via Yu-Packet Plus with cushioning material packed inside, with the lid removed.
★Originally sold as an external HDD device, the lid was not easy to remove. If you are familiar with these types of devices, you should be able to figure out how to install it by looking at the actual item.
★Please purchase only if you know how to install a 3.5-inch HDD. The cables inside are loose; pulling them carelessly could cause them to break. Please refrain from purchasing if you are not familiar with such matters.
★★We do not provide any support. Please research how to format the drive yourself.
(Additional photos and descriptions)
・Photos 11 and 12 show a 6TB HDD installed for testing.
・Photos 13 and 14 show the PC powered on. The blue lamp is lit as it is operating via USB 3.0.
・Photo 15 shows the CrystalDiskInfo application running, displaying the 6TB HDD connected via SATA.
・Photos 16 and 17 show the protrusions on the plastic case, and photos 18 and 19 show the screw holes.

Thank you for looking.

2026-3-22