Rack that can hold 3 HDDs in 2 x 5-inch bays. 3rd Generation "Waza-ari! Raku Rack! V2"

Century 3rd Generation Waza-Ari! Raku Rack! V2 (CWRS3-BK2)
This is an internal HDD rack that can hold 3 HDDs in a 2-tier 5-inch bay.

Supports not only SATA drives but also SAS drives.

The exact model number was unknown, but the instruction manual was found, confirming it as CWRS3-BK2.
*Instruction manual is also included.

Since the PC that could accommodate this has been sold, power-on has been confirmed by plugging in the peripheral power, the fan spins, and the lamp color changes when an HDD is inserted (all 3 tiers). Other functions have not been confirmed.

As a point of caution, the upper door was damaged and has been repaired.
It was reinforced with staple-shaped iron cores, plastic welding, and plastic repair, then polished and painted. However, it is weaker than the lower two tiers in terms of strength, so please be careful when inserting/removing, such as holding the base of the door.

The lower two tiers can be smoothly inserted and removed with normal use.

While 5-inch bays are becoming a relic of the past, parts like this are becoming rare. We hope someone can make good use of it.

Below is an excerpt from the manufacturer's specifications and product introduction.

Product Name: 3rd Generation Waza-Ari! Raku Rack! V2
Model Number: CWRS3-BK2
Interface: SATA/SAS
Connection: Internal 5-inch bay
Cooling Fan: 6cm square x 2, 3000rpm ±10%, Noise Level 23.8dB
Weight: Approx. 1,378g
Dimensions: Width 146mm x Height 84mm x Depth 200mm

Supports both SATA/SAS! You can use high-speed SAS (Serial Attached SCSI) drives!

Simply insert the HDD! Plus, the easy-rack mechanism automatically ejects the HDD when you open the door!

Can hold 3 HDDs in a 2-tier 5-inch bay!
Heat dissipation with 6cm diameter cooling fans!
Power/Access LEDs for each HDD!
Supports SATA 3.0 (SATA 6Gbps)!
*Your HDD and host interface must also support SATA 3.0.