Usable on PSP. Baryon Sweeper (equivalent to Pandora Battery)

The Pandora battery can only be used with PSP 1000 and pre-countermeasure PSP 2000 models.
However, by using this unit, it may be possible to repair a bricked PSP 3000.

For a general guide on how to use it, please refer to the YouTube video below:
https://www.youtube.com/watch?v=ZiyRU0H7CU8

We cannot answer questions regarding usage.

Usage Procedure:
A Magic Memory Stick (MMS) is required.

A virtual COM port driver is necessary. Connect the USB connector and install it from the following site:
https://www.silabs.com/developer-tools/usb-to-uart-bridge-vcp-drivers?tab=downloads

1. Download the connection software from Github:
   https://github.com/khubik2/pysweeper

2. Download and install Python:
   https://www.python.org/

3. Perform Python setup.
   Refer to the YouTube video for each command.

   pip install pycryptodome

   python.exe -m pip install --upgrade pip

   pip install tk

   pip install pyserial

   pip install requests

4. Connect Baryon Sweeper to your PC and launch pysweeper.
   Set the COM port and press Start Service.

5. Insert Baryon Sweeper into the battery slot.

6. Wait for strings to appear in the pysweeper Protocol Monitor and for the PSP to boot.