2x4 Adjuster Set of 4 with Scratch-Resistant Sheets, 95mm

2x4 Adjuster Set of 4
Includes scratch-resistant sheets
Please comment for other quantities.

These are DIY parts for fixing 2x4 lumber vertically to create posts.
If you just want to set up posts, you don't need complicated procedures or special tools.
They can be securely fixed using the force of a jack, making them easy to install.
Commercial products leave a gap between the wall, but this one does not.

Imitation and plagiarism are prohibited.
Adjusters with only the upper part have existed for a while, but I thought about how to make it work for those without a drill or an 8mm drill, and came up with and created the lower part. I came up with the drill-free type.

DIY Storage Parts

Washers have been added between the upper hex and the wood. This addition provides stability and acts as a lock nut.
Therefore, when assembling the upper part, please insert the washer onto the bolt before inserting it into the hole.

Assembly
The product will be shipped disassembled. As shown in photo 3, insert the washer onto the bolt, lightly tighten it (do not overtighten), insert the wood, then add the washer, nut, nut, and washer in that order, and tighten the upper part with the nut.

Installation Method
① Cut the 2x4 lumber to be used as a post to a length of approximately 80mm less than the installation height.
② Screw the lower part of the adjuster to the top of the 2x4 cut in ①. (Photo 4)
③ Insert the threaded part of the upper adjuster into the hole drilled in the post from ②.
④ Once aligned with the installation location, stand it vertically (use a level), and tighten by turning the lower nut clockwise with a wrench to create tension.
〇 Please sandwich the scratch-resistant sheets between the floor and ceiling, at the bottom of the post and on top of the adjuster. Attaching them with double-sided tape is easy.
Tools Required
〇 13mm wrench or monkey wrench or similar tool to turn the nut
〇 Electric drill or impact driver or Phillips screwdriver
〇 Saw (You can also have it cut at a home improvement store)
〇 Level (Apps are also available.)
Drill not required

Due to being handmade, there may be slight variations.
Painted versions are also possible, so please contact us.

Any quantity is possible. Please contact us.

#Adjuster
#Cat Tower
#Cat Walk
#Wall Mounted TV
#Tension Wall Storage
#Partition
#Anti-tip
#Escape Prevention Fence