Limited edition green with Velcro! Dust hose cover, inner diameter 28mm, 5m hose, almost fully covered

The color is a combination of green, yellow, and purple. (Images from the second one onwards are for illustrative purposes and are not the actual color being sold.)

Includes two detachable Velcro straps, allowing for tool-free adjustment anytime the cover becomes loose.

This is a hose cover designed to be placed over the outside of the hose connecting a dust collection circular saw and a dust collector, preventing wrinkles and improving sliding.
Makita's cord-in hose can get clogged with drywall paper dust in the section where the cord enters the hose.
Hitachi's hose cover can be baggy, and wrinkles may catch.
Ryobi's hose cover is 2.5m long, but when actually attached, it shrinks due to its thickness, covering only about 2m.
With a total length of 5m, it can cover over 4.5m of the dust collection hose, even with a 28mm hose and cord.
Please note that if you cover the entire length, the attached cord will also be 5m, making it impossible to plug into the dust collector's outlet.
Therefore, it has been made slightly shorter.
Secure both ends with Velcro.
Please note that the hose and cord are not included; please use your own.

Some products are casually referred to as full covers, but be aware that covering a 5m hose with a 5m dust collection circular saw cord will prevent you from plugging it into the dust collector's outlet. Images that appear to have extra cord at the plug end are likely special productions with 5.5m cords.