Tsurumi Low Water Level Submersible Pump, Automatic, LSRE2.4S, 60Hz

The suction cover's rubber bellows on the suction side allow water intake through the side slits even if the bottom strainer becomes clogged.
The impeller uses special water-resistant urethane rubber, achieving approximately three times the abrasion resistance of FCD700.
With a low-water level bottom design, it can pump water when there are only 10mm of water from the bottom of the pump. It drains even small amounts of water. (No priming required type)
The bottom is integrally molded from synthetic rubber from the pump casing to the stand, preventing damage to the floor and absorbing impact to the main unit.
Lightweight materials such as aluminum die-casting, special abrasion-resistant synthetic rubber, and special water-resistant urethane rubber are used throughout, resulting in a lightweight yet strong design.
The shape is designed so the pump will not fall over even when turned upside down. Maintenance can be performed on the pump unit with a single 13mm box wrench without removing the impeller.
Electrode automatic type (LSRE model). (A) Automatic operation can be achieved simply by connecting the power supply. (B) A completely new control system is adopted to prevent noise from continuous dry running. This automatic operation method combines  for water level detection with a  to prevent malfunction due to wave action, and is particularly effective for use in densely populated residential areas at night. Operation: When the water level rises and both electrodes are submerged, the pump starts. Then, when the water level drops and the water surface separates from the electrodes, the timer activates, and the pump stops after approximately 1 minute of operation.
Discharge port diameter (mm): 50
Output (kW): 0.48
Phase/Voltage (V): Single-phase 100
Total head (m): 8
Discharge rate (m3/min): 0.12
Starting method: Capacitor run
Weight (kg): 11.1
Foreign matter passage diameter (mm): 6
Cable type: VCT
Cable core count x cross-sectional area (mm2): 3 x 1.25
Cable finished outer diameter (mm): 10.1
Cable length (m): 5
Dimensions d (mm): 50
Dimensions A1 (mm): 149
Dimensions B (mm): 303
Dimensions D (mm): 210
Dimensions H (mm): 304
For floor water drainage in general construction work.
For low-water drainage in manholes, pits, and water tanks.
For general residual water drainage.


This is a new, unused item.
Please refer to the images for detailed condition.

All accessories are shown in the images.

As this is amateur management, please refrain from purchasing if you are sensitive or seeking a perfect product.

*Please allow for slight color variations due to amateur digital photography.