Emergency Exit Light Inspection Remote Control Type IV

An essential item for fire equipment technicians and building equipment inspectors when inspecting fire equipment and building equipment. This single remote control allows for the inspection of emergency exit signs and emergency lights (emergency lighting). It can be used as a substitute for the remote controls of the three major manufacturers' emergency exit signs/emergency lights (emergency lighting).

*Note: Genuine Mitsubishi remote controls have separate buttons for emergency exit signs and emergency lights. If a Mitsubishi remote has only one button, it can typically only control either the emergency exit sign or the emergency light. However, this remote control has two buttons for Mitsubishi, allowing it to control both emergency exit signs and emergency lights even for Mitsubishi products.

This remote is equipped with the minimum necessary functions for inspecting emergency exit signs and emergency lighting.

[Detailed Button Function Explanation]
Toshiba Emergency Exit Signs / Emergency Lights
Power Button: Manual Inspection
Panasonic Emergency Exit Signs
Vol∧: Inspection
Vol∨: Interruption
Panasonic Emergency Lights
Ch∧: Inspection
Ch∨: Interruption
Mitsubishi Emergency Exit Signs
Mute: Manual Inspection
Mitsubishi Emergency Lights
AV: Manual Inspection

[Button Function Description]
Inspection Button
Initiates self-inspection and automatically returns to normal status after inspection is complete.
Interruption Button
Interrupts self-inspection and returns to normal status.
Manual Inspection Button
Switches to emergency lighting for 3 seconds (Mitsubishi) or 5 seconds (Toshiba), then automatically returns to normal status.

Labels are applied using Tepra tape, but as these are handmade, they may differ slightly from the photos.

This listing is for the main unit only. Batteries are not included.
Please prepare two AAA batteries.

*Verification: The infrared signals of each manufacturer's remote control have been analyzed, and it has been confirmed that equivalent infrared signals are being output. This was verified by comparing infrared signals acquired by a self-made infrared signal analysis and acquisition device with computer analysis.
Furthermore, operation has been confirmed on actual devices.
(Operation has been confirmed on our home testing equipment. It has not been used in the field.)

Caution:
To remove the back cover for battery insertion, you need to pull the strap.

We ask for your understanding before purchasing.