Emergency and Exit Light Inspection Remote Control

This remote control can be used for building equipment inspections and fire safety equipment inspections.
Due to the limited number of buttons that can be memorized, the functions have been narrowed down to the bare minimum.
The Tepra labels are prone to peeling, so they are included as a bonus.
Also, as they are applied by hand each time, the appearance may differ from the photos.
The function buttons are set as follows:

[Button Layout Explanation]
(From the top button downwards, Tepra labels are attached below each button.)
Toshiba: Toshiba Emergency Lighting/Exit Sign Manual Inspection
Pana Emergency Light ON: Panasonic Emergency Lighting Inspection
Pana Emergency Light OFF: Panasonic Emergency Lighting Interruption
Pana Exit Sign ON: Panasonic Exit Sign Inspection
Pana Exit Sign OFF: Panasonic Exit Sign Interruption
Mitsubishi Emergency Light: Mitsubishi Emergency Lighting Manual Inspection

[Button Function Explanation]
Inspection Button
Starts self-inspection and automatically returns to normal status after the inspection is complete.
Interruption Button
Interrupts self-inspection and returns to normal status.
Manual Inspection Button
Switches to emergency lighting for 3 seconds (Mitsubishi) or 5 seconds (Toshiba), then automatically returns to normal status.

This listing is for the main unit only. Batteries are not included.
Please prepare two AAA batteries.

*We have verified that equivalent infrared signals are output by analyzing the infrared signals of each company's remote control and comparing them with infrared signals acquired by our custom-made infrared signal analysis and acquisition device using a computer.
Furthermore, we have repeatedly conducted operational checks with actual equipment.
(This is an operational check with our in-house verification exit sign. It has not been used in the field.)

We ask for your purchase only if you understand these points.