4-Company Compatible Emergency Lighting Inspection Remote Control

This is a remote control for emergency exit sign inspection, specialized for use with four major manufacturers.
It supports Toshiba, Panasonic, Odelic, and Mitsubishi, making it compatible with most LED emergency exit signs.
(For Odelic products, compatibility is with the RC920 remote control.)
Due to the limited number of buttons that can be memorized, the functions are streamlined to the essential minimum.
The Tepra labels are included as a bonus, as they tend to peel off easily.
Also, as each label is applied by hand, the appearance may differ from the photos.
The button functions are set as follows:

[Button Layout Explanation]
(From top to bottom, with Tepra labels applied below each button.)
Toshiba: Toshiba Emergency Exit Sign Manual Inspection
Pana Exit Sign On: Panasonic Emergency Exit Sign Inspection
Pana Exit Sign Off: Panasonic Emergency Exit Sign Interruption
Odelic Exit Sign On: Odelic Emergency Exit Sign Inspection
Odelic Exit Sign Off: Odelic Emergency Exit Sign Interruption
Mitsubishi Exit Sign: Mitsubishi Emergency Exit Sign Manual Inspection

[Button Function Explanation]
Inspection Button
Starts self-inspection and automatically returns to normal status after inspection is complete.
Interruption Button
Interrupts self-inspection and returns to normal status.
Manual Inspection Button
Switches to emergency lighting for 3 seconds (Mitsubishi) or 5 seconds (Toshiba), then automatically returns to normal status.

This listing is for the main unit only. Batteries are not included.
Please prepare two AAA batteries.

*We have verified that equivalent infrared signals are output by analyzing the infrared signals of each manufacturer's remote control and comparing the infrared signal data obtained with our custom-made infrared signal analysis and acquisition device on a computer.
Furthermore, we have confirmed operation with actual devices for Toshiba, Panasonic, and Mitsubishi products.

We ask for your understanding before purchasing.