Asahipen Fiber Wall/Sand Wall Stabilizer 4L (Remaining 3.3L)

- Product Name: Fiber Wall/Sand Wall Stabilizer
- Capacity: 4L
- Use: Substrate preparation
- Features: Prevents peeling, allows wallpaper to be applied

Selling because I have excess from a previous project.
Remaining amount is 3.3L.

[Product Description]
Asahipen Wallpaper Fiber/Sand Wall Stabilizer 2L (approx. 6 tatami mats) No. 732 Prevents peeling, allows wallpaper to be applied over fiber walls, water-based, made in Japan.
This is a substrate preparation paint for applying wallpaper to fiber walls, sand walls, etc. It reinforces the wall surface to prevent peeling and enhances adhesion with the wallpaper.
It is a water-based type and easy to handle.
Can be used as is without thinning.
Can be used as is without thinning.
Uses: For substrate preparation when applying wallpaper to fiber walls, sand walls, plaster, concrete, mortar, etc.
2L / Approx. 6 tatami mats (approx. 1.0 m2)
Material/Ingredients:
Synthetic resin (acrylic resin), water
Precautions:
Wear clothing that will not be damaged if paint gets on it.
Do not apply over wallpaper.
Apply as is without thinning.
Apply when the temperature is not below 5°C during painting and until the painted surface is dry.
Do not touch until completely dry.
This product is a substrate preparation paint, so always apply wallpaper over it. When doing so, be sure to use a dedicated adhesive for fiber walls/sand walls (e.g., Strong Type Wallpaper Adhesive Super) or substrate preparation paper (Fiber Wall/Sand Wall Stabilizer Paper).
Painting area and drying time may vary slightly depending on the material, application method, and weather conditions.
Do not return liquid that has been transferred to another container to the original container.
Dispose of the container after using all the paint.
If you must dispose of paint, solidify it with a water-based/oil-based paint solidifier or spread it on newspaper, etc., let it dry, and then dispose of it as general waste.
Ensure good ventilation during and after work.
Store out of reach of children and take care to prevent accidental ingestion, eating, or mischief.

A 2L paint suitable for walls and sand walls, easily applied with a brush or roller.

- Capacity: 2L
- Use: For walls and sand walls
- How to use: Apply with brush or roller
- Drying time: Approx. 6 hours (20°C)
- Precautions: Shake well before use.

Thank you for looking.