Urethane Clear Semi-Gloss Main Agent/Hardener Set 4L x 2

Non-TX Urethane is a solvent-based, two-component urethane coating that can be used for high-end furniture finishes on counters, tabletops, and built-in materials where durability is required.

It offers excellent adhesion and good penetration, allowing it to adhere well to any wooden substrate regardless of the material. Non-TX Urethane provides good build and forms a tough coating film with excellent chemical and solvent resistance, as well as good transparency.

Non-TX Urethane is a two-component system, so always mix the main agent and hardener before use.

?Mixing Ratio? Main Agent : Hardener : Thinner = 1 : 1 : 0-0.3
*As a general rule, use undiluted. If diluting, use [Non-TX Urethane Thinner].

【 Precautions 】

* Shake the container well before use to ensure the contents are uniform.
* The mixing ratio for Non-TX Urethane main agent and hardener is 100:100 (equal parts). Stir well before use.
* Once mixed, the coating will harden over time. *Estimated pot life: Winter (6 hours), Summer (4 hours)
* Use a brush, roller, or spray gun for application.
* As a general rule, use undiluted. If diluting, use [Non-TX Urethane Thinner].
* The dilution ratio for thinner is 0-30 parts per 100 parts of the main agent (for brush application). We also recommend [Non-TX Urethane Special Thinner] for cleaning brushes, rollers, and application equipment.
* The hardener reacts with moisture in the air and hardens. Take out only the amount needed for use and seal the container immediately.
* Fogging may occur in rainy or high-humidity conditions.