Set of 4 - Pique Thread Fixative - 33ml - KAWAGUCHI - 11-240

Set of 4
Pike Fray Stopper, 33ml, KAWAGUCHI, 11-240

[Uses]
- Prevents fraying of cut fabric, buttonholes, and edges of easily fraying fabrics.
- For cut edges of ribbons, lace, and fabric tape, and for finishing embroidery edges.
- For reinforcing machine bar tacks, and the start and end of machine stitching.

[Features]
- Non-adhesive (※This is not an adhesive.)
- Usable on various fibers
- Dry cleaning and washing OK
- Dries quickly and does not easily become stiff

[How to Use]
※Please place paper or similar material underneath when working.
- For fraying of cut fabric, apply to the edge of the cut with a spatula or toothpick, controlling the amount of liquid, to a width of about 3mm from the edge.
- When using on thin fabrics or in narrow areas, use kitchen paper or similar material to apply a small amount to the tip of the thread after sewing is complete.
- For reinforcing button thread, use a toothpick or similar tool to apply a small amount to the button shank and thread, being careful not to get it on the surface of the button.

[Precautions for Use]
- Depending on the fabric, the applied area may appear white and noticeable after drying. Please test on a scrap piece of fabric before use.
- If the liquid in the container separates or becomes cloudy during storage and is used as is, it may appear white and noticeable after drying. Warm the container in a hot water bath (around 60°C) and shake well until the liquid returns to a smooth, flowing consistency before use.
- Remove any lumps from the nozzle outlet before use.
- When washing, do so after the liquid has completely dried.
- Keep out of reach of children.
- Contains organic solvents, so use in a well-ventilated area.
- 〈Fire Hazard〉

[How to Remove Liquid from Fabric]
Place a towel underneath, soak a brush with rubbing alcohol, and gently dab to remove the liquid. Repeat several times. Warming the applied area with an iron beforehand will make it easier to remove.