Bond E250 High-Performance Concrete Adhesive, 2kg Set, Konishi

Brand new and unopened.
Bond E250 High-Performance Adhesive for Metal and Concrete, 2kg Set #45827

Applications:
Adheres concrete, mortar, metal, stone, brick, wood, ceramics, etc.
However, it cannot adhere to polyethylene, polypropylene, fluororesin, silicone resin, etc.

Features:
- Strong adhesion: Shows excellent adhesive effect even between steel parts.
- Wet surface adhesion: Can adhere to wet surfaces.
- Durability: Excellent water resistance, chemical resistance, and oil resistance.
- Gap-filling adhesion: Minimal shrinkage after curing.

Clean the bonding surfaces by removing dirt, dust, oil, rust, release agents, paint, laitance, etc.
For acrylic, rigid vinyl chloride, and ABS, always apply a thin coat of Bond Primer 80, and after drying, bond with E250.
Treat metal surfaces and surfaces of polyester, melamine, and phenolic resin with sandpaper or sandblasting to a roughness of approximately #120.

Measure the main agent and curing agent at a mixing ratio of 1:1 (by mass) and mix thoroughly. The amount mixed at one time should be usable within the pot life.
Apply evenly with a spatula or notched trowel. The standard application amount is approximately 500g/m2 for smooth surfaces like metal, and approximately 800g/m2 for rough surfaces like concrete. For rough surfaces or gap-filling adhesion, applying to both surfaces is effective.

Apply within the pot life and join as soon as possible. Fix and cure for at least 5-6 hours (at 20°C) to prevent the bonded object from moving.

*Cured E250 is insoluble in organic solvents. Clean material surfaces, used containers, and tools with organic solvents before E250 hardens.
# KONISHI
#Concrete Mortar Block Metal
##45827

KONISHI
Concrete
Mortar
Block
Metal
#45827