289 Heat Gun Japanese Instruction Manual PSE Certified

? Continuous use time when using a heat gun at [2] settings (500℃-600℃) with a concentrated nozzle: 3-layer concentrated nozzle: within 30 minutes, 5-layer concentrated nozzle: within 10 minutes. (Please strictly adhere to this). Due to the very small exhaust port, prolonged use can cause overheating inside the unit, leading to malfunction. ? During initial use, a small amount of adhesive in the built-in mica paper may cause light smoke. This is a normal phenomenon and will disappear within 3 minutes.
【Safe and Secure with Japanese Standards】? This is a heat gun that has obtained Japanese PSE certification. ? Power: AC100V 50/60Hz (compatible with Japanese outlets). ? The overload protection function eliminates worries about mechanical failure due to overheating.
【Stepless Temperature Control + 2 Airflow Settings】● The heat gun is equipped with both an airflow control switch and a stepless temperature adjustment dial. You can easily control the precise temperature for your work. Use the switch to toggle between the strong and weak airflow modes of the heat gun. ? Weak airflow mode Ⅰ: Airflow 250L/min, Temperature range 50-300℃. ? Strong airflow mode Ⅱ: Airflow 500L/min, Temperature range 50-650℃. *Turning the dial to the left gradually lowers the temperature. Turning to the right gradually raises the temperature.
【Includes 6 Accessories】? A versatile hot gun that can be used for various heat treatment processes with powerful hot air. Comes with 3 types of nozzles for shrinking heat shrink tubing, adhesive treatment, paint stripping, resin pipe molding, plastic welding, heating heat shrink film, seal removal, circuit board repair, soldering, drying, thawing, and more. ? In addition to nozzles, a scraper, heat shrink tubing, and a heat shrink bag are also included. These can be used to scrape or peel materials that are difficult to handle with a heat gun alone.
【Rapid Cooling of the Heat Gun】? Before finishing your work, switch to strong airflow mode, turn the temperature adjustment dial all the way to the left, and wait 5 minutes to cool the heat gun. After the temperature has significantly decreased from the high working temperature, turn off the power. Then, store the heat gun after it has completely cooled down. *Instead of natural cooling at high temperatures, cool it down to a low temperature first. This protects the heat gun from overheating, extends the lifespan of the heating element, and saves cooling time for increased efficiency. ? The nozzle and outlet become very hot. Do not touch them until they have cooled down.