Wooden Cage 1200x450x450 Walnut

☆SPEC☆
SIZE: Approx. W1200 x D450 x H450
Board thickness: 12mm

Color: Walnut

Front opening: Approx. W1090 x H300

Both side nets: W255 x H180
Resin, black, 10x10mm pitch

Bottom approx. 70mm unused resin tray processing (black)
*Gaps are finished with caulking.

Rear left and right upper rotating cord cap processing x 2 locations

Front door is glass sliding door: glass thickness 4mm

Inner left and right upper stays (approx. 35mm)

[Product Details]
This is a wooden cage for keeping tortoises, box turtles, geckos, bearded dragons, and small animals. This is a 1200 size product excellent for keeping and breeding.

The color is walnut, and the mesh parts are also black to match.
*The mesh parts are made of resin that is gentle on the pet's claws.

The cage is made of wood, and the exterior is coated with clear varnish. *Basically, high-level industrial standard materials (solid wood, linden lumber, etc.) are used, and environmentally friendly varnish is also used.

A custom-made resin tray is attached to the bottom of the cage up to a height of approximately 70mm, so liquids such as pet waste are unlikely to soak into the wooden parts. (It was fine even if the substrate was slightly moistened below approx. 70mm.)

There are wooden processed parts of approx. 35mm on the upper left and right sides inside, which can be used as stays for clip stands.

Cord caps are also processed on the left and right sides of the back, so there will be no trouble with cord management.

The front opening is as large as possible to prioritize visibility and strength. The glass of the door is also a thick 4mm to accommodate larger pets.

Since it is made of wood, it has good ventilation and moisture retention.

The 1200 x 450 size allows for versatile enjoyment with layout and keeping large individuals.

Since the base is wooden, it is easy to use and customize or process as you like, giving it a DIY feel.