RepBox Wooden Cage 900x450x450 for Small Animals and Reptiles, Brown

RepBox Wooden Cage 900x450x450 for Small Animals and Reptiles, Unused.

☆SPEC☆

SIZE: Approx. W900 x D450 x H450
Board Thickness: 12mm

Color: Brown

Front Opening: Approx. W790 x H300

Mesh on Both Sides: W255 x H180
Resin, Black, 10x10mm pitch

Bottom Height: Approx. 70mm, Resin Tray Processing (White)
*Fixed type, gaps finished with caulking.

Rotary cord caps on the upper left and right rear, 2 locations.

Front door: Glass sliding door, 3mm thick glass.

Upper inside left and right sides with stays (approx. 35mm).


【Product Details】
This is a wooden cage for keeping tortoises, geckos, bearded dragons, and small animals, made for an event. It was produced with a woodworker with the aim of being usable by a wide range of people.

The brown color specification and the mesh parts on the left and right are made of resin mesh (black) that is gentle on the pet's claws, rather than metal.

The cage is made of wood and coated with clear varnish on the outside. *The wood used (solid wood, linden lumber, etc.) is of high industrial standard, and the varnish is environmentally friendly.

The bottom of the cage has a custom-made fixed resin tray up to a height of approximately 70mm, so liquids such as waste from the animals are unlikely to soak into the wooden parts.
(It was fine to slightly dampen the substrate if it was below approximately 70mm.)

There are wooden processed parts of approximately 35mm on the upper left and right inside, which can be used as stays for clip stands.

There are also cord caps processed on the left and right rear, so there are no issues with cord management.

The front opening has been made as large as possible while prioritizing strength for good visibility.

Being wooden, it has good ventilation and moisture retention.

The 900x450 size allows for versatile use in keeping animals and creating layouts.

Since the base is wooden, it is easy to use and customize or process as you like, with a DIY feel.