Tetra Leptotherm 50W

Quantity can be changed.

This is an ideal reptile heater.

The box is bulky, so it will be shipped packed as shown in image 3.

- Built-in automatic temperature controller, so no thermostat is required.
- Safety features include a flame-retardant plastic cover and a temperature fuse.
- Can be set vertically for flexible layout.
- Complies with the unified standards of the Ornamental Fish Heater Safety Measures Council.
- The heater must always be set in an area with water flow.
If set in an area without water flow, the sensor may malfunction and the correct water temperature cannot be maintained.

Product Introduction
- Built-in automatic temperature control function, so no thermostat is required. Maintains water temperature around 26°C.
- If the automatic temperature controller malfunctions due to continuous dry heating, the temperature fuse will cut off the power. (Cannot be reused.)
- Comes with two types of covers: a flame-retardant plastic cover and a rubber cover for damage prevention.

Instructions for Use
- Never energize in the air.
- Do not remove the heater from the water immediately after turning on the power or unplugging the power cord.
- Never touch the heater while it is in use, even when submerged in water.
- Ensure the detachable heat-resistant cover is properly attached.
- Always set the heater in an area with water flow and at a depth where it will not be exposed even if the water evaporates.