S1DX Timer (S-One)

Features: The S1DX timer is equipped with comprehensive functions required for small analog timers.
Improved visibility and operability with a large dial.
LED display for easy operation confirmation.
Terminal shape: Plug-in terminal
Time-limit contact: 2c
Dielectric strength:
(Between charged parts and non-charged parts, between different polarity charged parts, between different polarity contacts) AC1500V / 1 minute,
(Between contacts) AC1000V / 1 minute
Temperature rise: 70℃ or less (measured at rated voltage, rated load, and coil resistance)
Insulation resistance (MΩ) (initial): Between charged parts and non-charged parts, between different polarity charged parts, between different polarity contacts, between contacts / 100 or more (using DC500V megger)
Operating ambient temperature (℃): -10 to +50 (without condensation)
Service life: Mechanical (contacts) / 10 million times or more (switching frequency 180 times/min),
Electrical (contacts) / 200,000 times or more (at rated control capacity, switching frequency 20 times/min)
Contact resistance (mΩ) (initial): 100 or less (at DC6V 1A)
Number of pins: 8
Vibration resistance (durability): 0.375mm (up, down, left, right, front, back for 1 hour each)
Shock resistance (durability): 980m/s2 (100G) or more
Operating ambient humidity: 80 to 85% RH (at 20℃)
Reset time: 0.1 seconds or less
Operating time variation: Within ±1% (within ±(2%+10ms) for 0.5-second type, within ±(1%+10ms) for 1-second type),
Rest time error / 0.1 seconds to 1 hour
Vibration resistance (malfunction): 10 to 55Hz (1-minute cycle) double amplitude 0.25mm (up, down, left, right, front, back for 10 minutes each)
Shock resistance (malfunction): 98m/s2 (10G) or more
Set error: Within ±10% (based on maximum scale time)
Rated control capacity: 7A 250V AC (resistive load)
Temperature error: Within ±5% (reference 20℃, variation -10℃ to +50℃)
Allowable voltage range: 80% to 110% of rated operating voltage V