PTC Temperature Control Heater (Outside Air Intake Type), Automatic Heater for Insect, Reptile, and Small Animal Husbandry

Simply prepare a small breeding box and install this product to manage the internal temperature of the breeding box.

■ Components
① AC100V (220V compatible) → DC12V 12.5A Power Supply Unit (with AC cord)
② PTC Heater: DC12V 100W + DC12V Fan
③ Thermal Sensor Switch (details sold separately as a single item) with DIY instructions
④ DC12V 40A Relay: JD1912 Normally Open
⑤ Wiring: 2.5sq

■ Product Specifications
? The maximum temperature rise will vary greatly depending on the material and size of the box. Please refer to Temperature Rise Tests ① and ②.
? Main specifications of the thermal sensor switch (actual adjustable range is within the heater's capacity)
　　Adjustment Range: -50℃ to 110℃ (temperature at which the heater turns OFF)
　　Hysteresis Range: 0.1℃ to 15.0℃ (how many degrees below the set temperature the heater turns ON again)
　　Mode: H Mode (ON when temperature rises: this setting for this product), C Mode (ON when temperature drops)
　※ Please refer to the DIY instructions for details.

■ How to Use
? Prepare a breeding box and create holes for the heater's warm air intake (approx. 55mm), two mounting screw holes, and a sensor hole.
? Secure the PTC heater to the outside of the box.
　 The fan side is the air intake, and the radiator (metal part) side is the warm air outlet.
　 Ensure sufficient space in front of the air intake and warm air outlet. Apply heat-resistant treatment as necessary.
　 Securely fasten with screws to prevent detachment due to heat.
? Close the lid of the breeding box. Seal any gaps. Enclose with insulation material as much as possible.
? Set the thermal sensor switch. Refer to the included DIY instructions for details.

■ Shipping
? Items will be shipped via courier within 2-3 days after payment is completed.

■ Notes
※ If you wish to use it in a higher temperature range, please consider the [PTC Thermostatic Heater (Internal Circulation Type)] sold separately.
? Please be sure to read the important precautions in the 8th photo.
? Please use after fully understanding the characteristics of the PTC heater.
? Wiring processing is done in Japan by qualified electricians.
? This is a handmade product and may not be perfect. We will repair or refund for defects upon arrival before you confirm receipt, but we cannot offer any other support.
? In case of malfunction or product modification, we can accept repairs if you are willing to cover the round-trip shipping costs and pay for replacement parts. Please feel free to contact us.