Care Slope 120 Wheelchair Ramp

Care Slope 120cm

●Due to extended use, there are numerous scratches. While the rubber parts at the top and bottom show little deterioration, there are scuff marks on the underside of the top edge where it contacts the surface.
The item has been thoroughly cleaned and finished with alcohol disinfection.
●The images marked with red circles indicate prominent scratches and stains.

●[Dimensions when in use]
Width 70cm x Length 120cm, Weight approx. 6kg
Load capacity: 300kg
●[Folded dimensions]
Width 35cm x Length 120cm x Thickness 8cm

●[How to choose a slope]
The basic guideline is a length that creates an incline of approximately 10 degrees. This angle allows for easy ascent and descent when self-propelling an electric wheelchair or when being pushed by a caregiver.
Guideline: Step height x 6 = Slope length

For self-propelled wheelchairs where the user operates the controls for ascent and descent, a gentler incline is necessary, with a guideline of a length that creates an incline of 5 degrees.
Guideline: Step height x 12 = Slope length

Furthermore, when using in confined spaces, please refrain from using the slope at an incline angle exceeding 15 degrees, as this poses a significant risk of falls and is very dangerous.

●We hold a qualification as a specialist consultant for welfare equipment, so please feel free to contact us if you have any questions regarding its use.

●For shipping, the product will be wrapped entirely in stretch film, and then further protected with rolled corrugated cardboard for dispatch.