Bathtub Grab Bar for Unit Bath UST 130UB Red

Height-adjustable bathtub grab bar, with antibacterial specifications for high safety.

- Model Name: UST 130UB
- Size: 30.5-36.5cm (Height adjustable)
- Grip Height: 11-20cm (Adjustable)
- Overall Height: 49.5cm
- Overall Width: 21cm
- Overall Depth: 8cm
- Manufacturer: ARONKASEI CO.,LTD.
- Features: SIAA Mark (Antibacterial)

★Important★
There are bathtubs and locations where this product cannot be installed. Please carefully read the 3rd image and the following precautions before considering your purchase.
Returns are not accepted.

★Bathtubs and Locations Where Installation is Not Possible★

Bathtubs: Wooden bathtubs, marble bathtubs
Locations: Tiled bathing areas, pebble-floored bathing areas, soft cushion-type flooring, large public baths, hot spring facilities
In addition to the above, please confirm that the product can be securely fixed to the bathtub before use.

■ Bathtubs with varying bathtub wall heights

■ Significantly deteriorated bathtubs
● Installing on deteriorated bathtubs such as cracked or rough-surfaced bathtubs may cause damage to the bathtub.
● The aging of bathtubs varies depending on the usage environment.

■ Bathtubs with a significant inward curve on the inner wall
A gap may form between the pressure plate and the bathtub wall, which can cause the product to detach.

■ Bathtubs with a wall thickness of less than 4.5cm
■ Bathtubs with a wall thickness exceeding 13cm

● Bathtubs with an inner wall slope exceeding 10°
Even if the slope is 10° or less, installation is not possible if the thickness 14cm below the top edge of the bathtub exceeds 13cm.

■ Bathtubs with significant curves or specific areas (corners)
Installation is not possible in areas where the difference between the thickest and thinnest parts of the bathtub wall exceeds 3cm.

■ Bathtubs with tiled exteriors and hollow interiors
If the exterior of the bathtub is tiled and the interior is hollow, installation is not possible.