LED Bar Light, 9 Colors RGB, Human Body Sensor, Foot Light, Sensor Light

Thank you for viewing.

[Convenient Motion Sensor Function]
Function ON (green light flashes) / Function OFF (red light flashes).
When first turned on, the LED bar light is in motion sensor mode.
You can operate the motion sensor function by pressing the switch on the LED lamp for 2 seconds or by using the remote control.
The motion sensor light automatically turns on when it detects a person nearby and automatically turns off when the person leaves the sensing area for 1 minute. (Sensing distance: approx. 5 meters)

[21 Starry Sky Lighting Modes & 10 Brightness Levels]
The LED bar light comes in 9 colors: white, warm white, ice blue, red, green, blue, pink, lemon yellow, and pink purple.
You can enjoy 21 lighting modes, including single color lighting, single color flashing, multi-color slow flashing (seven-color cycle), and multi-color fade flashing (seven-color cycle).
Brightness can be adjusted in 10 levels. When the light color and brightness are adjusted with the remote control, the previously set lighting mode is retained upon restart.

[Remote Control Operation Possible]
The remote control for the LED bar light has buttons corresponding to each light color and lighting mode, maximizing convenience of operation.
The communication distance is approximately 20 meters, and it can be operated without directly pointing at the bar light.
The RF wireless remote control has a built-in battery and can be used for a long time.

[2 Installation Methods]
No complicated wiring is required, and it will not scratch car interior parts when used in a car.
Peel off the tape on the back of the metal plate, stick it in a desired position, and then attach the bar light with the magnetic lip onto it.
Alternatively, you can use the magnet on the back of the bar light to attach it to any magnetic surface.

[Battery Level Display]
Check the battery level of the tape light with a dedicated button on the remote control to prevent sudden power loss.
The red light flashes 4 times (approx. 100% remaining), 3 times (approx. 75% remaining), 2 times (approx. 50% remaining), and 1 time (approx. 25% remaining).

#ysselec ?Check out our other products
49-40/⑧-2699