Peltier element (12V 5A) x2 + Silicone grease 20g set

Please note that this item will be shipped via Yu-Packet Post Mini, which may take some time to arrive.

■ Features
When the black wire is connected to negative and the red wire to +12V, the TEC1-12705 printed surface will become cold, and the opposite side will generate heat. Reversing the negative and +12V connections will reverse the cold/hot surfaces. *A heatsink (such as a heat sink) is required. Please be aware that the internal elements will burn out in a short time if heat is not dissipated.

■ Specifications
Model: TEC1-12705
Size: 40mm x 40mm x 3.8mm
Rated Voltage: 12V
Rated Current: 5A (actual measurement 3.4-3.8V)
Operating Temperature: -40℃ to 90℃
Maximum Cooling Power: 54.7 W (Th = 50 C), 49.28 W (Th = 27 C)
Maximum Temperature Difference: 75℃ (Th = 50℃), 68℃ (Th = 27℃)

■ Silicone Grease
GD460 Thermal Grease
20W/M-K
20g

■ Precautions
?This product is very fragile, so please handle with care to avoid impact.
?Balanced heat dissipation is essential. We also have Peltier Cooling Units and Peltier Water Coolers/Heaters listed separately, so please refer to them. Imbalanced heat dissipation will not only be ineffective but can also lead to damage.
?Apply silicone grease evenly to the heat dissipation surface and securely tighten the heatsink so that pressure is applied uniformly. Do not overtighten, as this can cause damage.
?Please use a power supply that can provide DC12V 10A. (We also have power supplies listed, so please inquire.) Depending on the balance with heat dissipation, lowering the voltage may improve performance.
?As stated above, please use this product only if you understand how Peltier elements work. Therefore, please purchase only if you understand that we cannot provide support for issues other than initial defects.

■ Shipping
This item will be shipped via Yu-Packet Post Mini. It will be packed with consideration for impact in a metal case prepared by us (included in the shipping cost), but please understand that this is simple packaging. In the unlikely event that the item arrives damaged, we will provide compensation. However, you will be responsible for the return shipping costs.

We have stock. If you need multiple units, please leave a comment.