LABRICO 1x6 Shelf Bracket DXO-32 Off-White 3-Set

Set of 3 LABRICO shelf supports for 1x6 lumber.

I tried using these but ended up switching to something else, so I'm selling them.
One box is unused, but I opened it to take photos just in case.

?Excerpt from purchase source?
1x6 Shelf Support
LABRICO Series
DIY product that can be used even in rental properties.
Simple design that doesn't detract from the slim profile of 1x lumber.
Mounting screws are not visible.
Easily add shelves to an already installed LABRICO post.
Adapter and shelf caps are separate, allowing for one-touch attachment and removal.
The cap system allows for fine adjustments to the shelf length.
Cut ends of the lumber are not visible.
Includes drywall anchors, so you can easily create shelves on drywall surfaces as well as wood.

Set Contents
[Model Number]
DXO-32
[Product Weight]
91g
[Dimensions]
Width 14.6 x Depth 4 x Height 2.4 (cm)
[Color]
Off-white
[Materials]
Main body: ABS resin
Screws: Iron, plated
Board anchors: PE resin

How to Use
01
Confirm the strength of the surface where the shelf will be installed and secure the adapter with the included screws. Install the other side at the same height.
*If the mounting surface is drywall, drill a 4mm pilot hole, insert the included board anchor, and then secure.

02
Attach the shelf caps to both ends of the 1x lumber, making it 20mm shorter than the desired mounting width.

03
Slide the 1x lumber with the shelf caps attached onto the adapters. If it's difficult to insert, slightly loosening the adapter screws will make it easier.

1496 yen x 3 pieces

My selling policies are listed in my profile. Please take a look.
I am also selling other items, including from Axes Femme. Please check them out if you'd like.