Custom Size Inquiry - Steel Expanded Metal XS33

Iron Expanded Metal XS33
Wire thickness: 2.3mm
Mesh size: 12 x 30.5
Weight: Approx. 570g per A4 size sheet
This is a sturdy mesh material with greater thickness and weight than XS and XF32.

We also offer zinc plating upon request.
(After plating, it will be shiny and bright, but will gradually turn a dull gray depending on the usage environment.)

We can cut it to your specified dimensions.

Please comment with your desired dimensions.
The maximum total length of the three sides will be 1950mm (to keep within 2000mm including packaging materials).

We will provide a quote including shipping.
(Please allow for approximately ±3mm variation as we cut at convenient mesh intervals.)

Would this be suitable for those looking for small quantities for DIY projects?

This is a raised type.
The wire thickness is 2.3mm, making it substantial.
If you plan to cut and process it yourself, considerable skill and tools will be required.

Rust can be reduced by applying one coat of rust inhibitor and two coats of topcoat using appropriate paint.

Thank you for viewing our listing among many others.

* The cut edges have been lightly chamfered, but please handle with extreme care.

We strongly recommend using protective gloves such as leather gloves (leather gloves are recommended over work gloves) when handling this product.

Please understand that we cannot be held responsible for any injuries or accidents that may occur due to the edges or other parts.

Also, please be aware that some rust may be present as this product is made of iron.
This product is intended for use after surface treatment such as painting or oil finishing.
If used as-is, rust will inevitably appear due to humidity, even without direct water contact.