Tank, Rainwater, Approx. 130L, Resin, Water Storage, Reservoir, Gardening, Medaka (Killifish), Reuse

This is a resin tank, a reused item from a food factory. It is the type shown in photos 1 and 2. The color is dark, with some writing on it.
The dimensions of the tank body (excluding the lid) are:
Height approximately 69 cm (height to the bottom of the screw part is approximately 64 cm), inner diameter of the opening approximately 34 cm, circumference approximately 164 cm (body diameter calculated from circumference is approximately 52 cm), and the weight including the lid is approximately 6 kg. The tank body has a size indication of 3.
(Capacity is approximately 130L based on a simple measurement; this is not a guaranteed capacity).
*Please note that these are amateur measurements, so there may be an error of about 1 cm.

*If requested, we can drill holes free of charge. (Hole sizes are limited to 20, 22, 28, 30, 42, 53, 55 mm in diameter. Other sizes cannot be accommodated due to tool limitations.) If you wish to have holes drilled, please inform us of the hole size and location promptly after bidding.

The lid has a double structure: an inner vinyl lid and a screw-on lid (please consider the inner lid as a bonus).
Since it was used for transporting food ingredients in a food factory, it can be safely used in fields, etc., with just a light wash.
As this is a reused item, there are scratches, writing, dents, sticker residue, dirt, cracks or chips on the lid's rim, fading, and odors.
All use is at your own risk.

*The photos are of tanks of a similar model and may be used as a substitute, so the color and shape may vary slightly depending on the size.
*We cannot combine shipping because it would prevent the use of Mercari shipping and result in higher shipping costs.
Thank you for your consideration.