New HASSELBLAD Acute-Matte D Screen 503 500

This is an Acute-Matte D type focusing screen for the Hasselblad V system.
This type aims for higher brightness than the genuine Acute-Matte D and is a highly practical screen. It is very bright and makes it easy to confirm the focus point.
This is a new, unused aftermarket product. It is not a genuine product.

Due to its structure, the screen, protective glass, and frame will be delivered as separate parts.
The final installation must be performed by the purchaser.
Please check the simple installation instructions below.
Additionally, focus position has been manually checked and adjusted using a digital back for each screen.

Compatible Models
Hasselblad
503CW / 503CXi / 501CM / 500C/M / 503CX / 501C / 205FCC / 205TCC / 203FE
*For V system bodies with interchangeable screens.
*As this is an aftermarket product, there may be slight individual differences during installation.

Accessories
・Focusing screen x 1 (packaged in non-woven fabric)
・Protective glass x 1
・Frame x 1

Installation Method
(1) First, insert the frame into the body.
Orient the side with the black mark on the frame towards the lens. The side with the screws should face downwards.
(2) Next, insert the focusing screen.
Please note that the screen has a front/back and a top/bottom orientation.
How to distinguish front/back:
One side is matte, and the other side is glossy.
Orient the matte side towards the mirror in the camera body.
The glossy side will be facing upwards. You can distinguish this by light reflection.
How to distinguish front/bottom:
Of the four corners of the screen, two are rounded.
Orient the side with the rounded corners towards the front (lens side).
(3) Finally, peel off the protective films from both sides of the protective glass and place it on top of the screen.
After installation, you can attach the viewfinder and use it as usual.