Cooler Master HAF XB Horizontal ATX Case

This is a case that allows for a horizontal layout of Cooler Master ATX motherboards.
It has good airflow with mesh, so it is not silent.
Official specifications are 180mm for CPU cooler and 334mm for GPU.
This is a separate unit from the same case I listed the other day. (I used two units, one as main and one as sub.)
One rail for the 2.5-inch bay is missing, so I've priced it slightly lower than the previous unit.

Accessories are as follows (see the second photo):
- Manual
- 2 x 12cm case fans (unused) + mounting screws
- 7 x 2.5-inch bay mounting rails (1 missing)
- Spare thumb screws (approx. 5)
- Inch screws/metric screws (I've added some as the original ones seem to be insufficient)
- A few zip ties
- BEEP speaker
- Spare fan splitter cable (unused)

It was used in a smoking environment with range hood filters attached. I removed the switches and circuit boards, high-pressure washed each part, and wiped it down with sesquicarbonate, alkaline electrolyzed water, and IPA for a thorough cleaning.
Please check the photos of each part for details.
(The case fans were replaced, so the included fans are unused.)

I believe it has been cleaned to a point where dirt and odors are not noticeable at first glance, but it is amateur cleaning, so please refrain from purchasing if you are concerned about this.
Although it is black and not easily noticeable, there are minor scuffs and other signs of use typical of a used item.
No claims, no returns (NC/NR).

Since I have disposed of the original box, I will ship the main unit wrapped multiple times in bubble wrap and packed in a 140-size cardboard box. (Accessories will be wrapped in bubble wrap and securely fixed to the motherboard tray inside the case with masking tape.)