YAMAHA 6, 8, 9.9, 15 HP Outboard Motor Stabilizer - No Drilling Required

New Improved Model
For Yamaha F6A/F8C, F/FT8D, G/F9.9C/F15A/FT9.9G.D.L (4-stroke) 9.9F/15F (2-stroke)

By bending the shape and slightly increasing the dimensions, the effect and top speed have improved compared to previous stabilizers.
Normally, increasing the size would increase resistance, but the bending shape has been changed to reduce resistance.
Also, the shape of the reinforcing bracket has been changed to avoid the water inlet and anode, allowing for greater installation flexibility.

Can be installed without modifying the outboard motor body.
The image of the outboard motor installation is of the old model.

[Stabilizer Effects]
Gliding (planing) is a state of navigation where a much larger lift force than buoyancy acts to support the object.
The hull is lifted by the lift force acting on the bottom of the boat, and when in a gliding state, the bow lowers, and the boat glides on the water surface with a trim angle (longitudinal inclination) of 3° to 5°.
Therefore, the stabilizer does not become horizontal, and lift is always generated on the underside with a trim angle of 3° to 5°.
This lifts the outboard motor and brings it into a gliding state more quickly.
This product is designed with a unique bending process to ensure flow velocity and prevent the planing effect from decreasing.
Please experience the effects of this stabilizer.

Material: SUS304 (Stainless Steel) 2B material, 2.0mm
Laser cut and bent

Resistant to salt damage (rust) and excellent strength due to bending.

Modifying the outboard motor (drilling holes) can peel off the paint and cause corrosion, but this product can be installed without modification, so there is no need to worry about corrosion.
Install by sandwiching the cavitation plate.
Reinforcing plates are included to be installed on the back of the cavitation plate in a non-protruding area, either one or two.
Modification may be required depending on the model year.
Left and right plates, reinforcing plate on the back, and mounting bolts are included (stainless steel).

This is an original product.
Note: There may be scratches, oil, burns, dross adhesion, etc. from the manufacturing process.
Please judge from the images.

★Important Notes★
Please refrain from purchasing if you are sensitive or concerned about minor details.
There is no warranty.
We strive for same-day response, but depending on work circumstances, same-day shipping may not be possible.
We are not responsible for any issues whatsoever.
We await your purchase only if you understand the above.