3D Keycap Tilt Kit (for 42 keys)

This is a tilt kit for split keyboards with 42 keys or less, offering versatile angle adjustments.
Attach it between the key switch and keycap to adjust the angle and height of your keycaps.
This allows you to bring the usability of your favorite keyboard and keycaps closer to your ideal, without changing them.

Points to Note:
- As these are 3D printed, there may be individual differences. Forcing them onto switches can cause them to break. Even if they break, they can still be used with reinforcement like tape.
- The 1mm spacers may have some burrs on the outer edges, but these can be easily removed by hand.
- The diagonal tilters are not perfectly symmetrical. If placed at the four corners, they may result in a slightly uneven angle (personally, I find this bothersome and do not use them in that configuration).

How to Use:
- You can connect multiple spacers and tilters, such as stem → spacer → tilter → tilter, for use.
- In this case, the further the distance to the switch, the greater the key wobble when pressed.
- For example, the photo shows a picot_O44 with tilters used (some items not included in this kit are used).
- In this example, the center space key of the keyboard uses two 15° tilters connected to achieve height and angle.

Compatibility:
- It appears to be compatible with most choc v2 and MX switches, but this has not been tested. Please use at your own risk.
- Based on personal experience, they work without issue with standard MX switches. For choc v2 and BOX type MX switches, while they can be used, they feel difficult to remove.
- Official comments are included in the photos.

Please feel free to ask any questions regarding usability or other aspects.
If you wish to purchase multiple units, please consult with us.

Price reductions are not possible.
We will accommodate requests for shipping methods if you have any.

*The keyboard, keycaps, and key switches shown in the photos are not included with the product. This is solely the tilting kit.