■Custom-made Dry Carbon Head Shell Washer, 0.5mm thick, M1071

Custom Order Dry Carbon Head Shell Washer, 0.5mm Thick, Set of 4. CFRP Carbon Fiber for Turntables, Record Players, Analog Players.

This is a custom-made, order-made product manufactured by a high-precision machining center at a high-end audio shop in Europe and America.

Machined from CFRP dry carbon, which is also used in the aerospace industry, using a high-precision machining center. It has 5 times the tensile strength of iron and 25 times the resonance resistance of granite, which moderately tightens the muddiness in the mid-low frequencies, improving S/N, and is expected to reduce micro-vibrations and electrical noise. It is the optimal material for reproducing musical signals buried in unnecessary resonance, improving detail and S/N ratio for a smooth sound quality, and reproducing a clear sound image and a three-dimensional, wide soundstage.

This ring washer with a slit to avoid lock pins is expected to improve sound separation when installed as a spacer between the tonearm and the head shell. If desired, further improvement can be achieved by sanding the dry carbon surface with fine sandpaper (around #800) to remove the epoxy layer.

- Condition: Unused
- Specification: 3K / Autoclave molding
- Quantity: Set of 4
- Weave: Plain weave
- Surface finish: Matte finish on both sides
- Weight: Approx. 0.05g / per piece
- Size: Approx. Outer diameter φ12 x Inner diameter φ8 x 0.5mm

Please note the following regarding the condition of the product:
- Metal parts may show slight signs of oxidation, scratches, scuffs, dents, etc.
- For products requiring assembly or installation, adjustments such as processing may be necessary depending on the item.