LABISTS ET4 3D Printer - Operation Confirmed - Includes Spare Nozzles, etc.

Purchased several years ago, I used it to make smartphone stands and small items, but haven't used it since for about 3 years.
I am now using a different machine and will no longer be using this one, so I am selling it.

Build Volume: 220 x 220 x 250mm

For this listing, I performed a test print of a scaled-down boat to confirm operation, and it printed successfully. I printed without adjusting flow rate or any other settings, so please adjust the conditions as needed. The software used is Cura.
The nozzle seems to be slightly clogged, so I recommend replacing it. I will also include spare nozzles as shown in the photos.

Data is loaded from a micro SD card.
Since it has been stored for a while, the contacts may be dirty, and it sometimes has trouble being recognized, but it will be recognized after a few insertions and removals.
Please prepare your own micro SD card.

The print stage has been modified with a magnetic sheet to make it easier to remove prints.
I will also include spare build sheets. You can buy a magnetic sheet from a 100-yen shop and attach it to the back of the build sheet, and it will snap onto the stage.

One small fin on the cooling fan has broken off (see photo), but it does not affect usability.

Tools and Japanese instruction manual are included.
I plan to remove the gantry by unscrewing it from the underside of the base and ship it that way.

There is dust buildup, but please clean it before use. (^^)
Thank you for your consideration.