Snow Peak Tarp Flag Pole

This is a flag stand specifically for Snow Peak tarp flags.
It was custom-made to allow the flag to be stored upright, preventing wrinkles and creases.
To attach it, simply insert the flag into the fixed shaft, tighten the screw to secure it, and attach the included rope with the stopper to prevent it from coming loose or falling.
The total height when the flag is attached is approximately 340mm, and the weight is approximately 350g.

[Set Contents]
Base: Steel, plated HL, diameter 88mm, thickness 4mm
Bolt M6, black felt attached to the underside
Nut: Stainless steel, diameter 10mm, length 25mm, M6
Fixed Shaft: Steel, black dyed, length 45mm, M6
Tapped portion approx. 10mm
Stopper: Aluminum silver (with rope)
Weight of set contents: approx. 230g

[Notes]
The base has scratches and uneven plating on its surface. The bolt attached to the base is slightly tilted. The fixed shaft has had both ends of the bolt cut with a grinder and then coated with a black metal dye for rust prevention. The tip of the flag will touch the ground.
*Please check the images.
*This is a handmade item and may not have the same quality as a commercially produced product. Please consider purchasing only if you understand this.
*Tarp flags are not included.
Ships via Yu-Packet Post.