Custom-made dry carbon washer for headshell, 0.5mm thick, a537

Custom-Made Dry Carbon Washer for Headshell, 0.5mm Thick, CFRP, Set of 4. For Turntables, Carbon Fiber, Record Players, Analog.

These are custom-made, order-manufactured items produced on a high-precision machining center at a high-end audio shop in Europe and the US.

Machined from CFRP dry carbon, which is also used in the aerospace industry, using a high-precision machining center. It possesses 5 times the tensile strength of iron and 25 times the resonance resistance of granite, effectively tightening the mid-low frequencies, improving S/N ratio, and reducing micro-vibrations and electrical noise. This material is ideal for reproducing musical signals buried by unwanted resonance, enhancing detail and S/N ratio for a smooth sound quality, clear sound imaging, and a three-dimensional, wide soundstage.

This ring washer with a slit to avoid lock pins can be installed as a spacer between the tonearm and the headshell to improve sound separation. If desired, further improvement can be achieved by lightly sanding the dry carbon surface with fine-grit sandpaper (around #800) to remove the epoxy layer.

- Condition: Unused
- Specifications: 3K / Autoclave molding
- Quantity: Set of 4
- Weave: Plain weave
- Surface finish: Matte on both sides
- Weight: Approx. 0.05g per piece
- Size: Approx. Outer diameter φ12 x Inner diameter φ8 x 0.5mm

Please note the following regarding the condition of the product:
- Metal parts may show slight signs of oxidation, scratches, scuffs, dents, etc.
- For products requiring assembly or installation, adjustments such as processing may be necessary in some cases.