Speaker Grille Z-Modena/FE83 etc. 8cm Removable 2 pcs ★Original★

Grille for 8cm (3-inch) diameter speakers such as Oto Kobo Z Z-Modena and Fostex FE83

Built-in magnets.
Attaches by magnetic attraction to speaker mounting screws.

■Manufacturing Method
　Manufactured using a fused deposition modeling (FDM) 3D printer.
　Magnets are secured with silicone-based adhesive.

  Please note that there may be unevenness and layer lines due to the characteristics of the manufacturing method. Also, as this is a handmade item, not an industrial product, there may be slight variations in the finished appearance.

■Material: PLA (Polylactic Acid Resin), Black

■Dimensions
　83mm (L) x 83mm (W) x 6mm (D)
　Small magnets built into 4 locations on the back. Mounting pitch: φ85mm
　Magnets used: φ5 x 3mm Neodymium, 4 pieces
　Refer to photos 6-8 for detailed dimensions.
■Installation Method
　Attach by magnetically attracting the magnets to the speaker mounting screws.
　Please use magnetic iron screws for speaker mounting.

■ Compatible Speakers (Reference)
　FOSTEX: FE83 series, FE87, FF85WK, M800, PW80
　Oto Kobo Z: Z-Modena (mk2)
　MarkAudio: OM-MF4, CHN40Pmica
　TangBand: W3-□□□□ (4-hole frame type)
　And others.
　Compatible with 4-hole types with a mounting hole pitch of approximately φ82-88mm.
【Caution】
　If the screw head is recessed into a concave hole in the speaker frame, a gap will form between the magnet and the screw head, weakening the magnetic attraction, and the grille cannot be attached.
　Please check your speaker's mounting screw positions, frame shape, and screw mounting configuration before purchasing.

■Photos
　Photos 1 and 3 show the grille installed on Oto Kobo Z Z-Modena (mk2).
　Photos 9 and 10 show the grille installed on Fostex FE83NV.

■Product Included
　Speaker Grille, Black, 2 pieces

　Speakers shown in the photos are not included.

Please understand the above before purchasing.

Speaker Cover
Grille Cloth
Fostex
Markaudio
Oto Kobo Z
Tangband
Dayton Audio
DIY Speakers