★UCO Candle Lantern Oil Insert★Free Shipping

The lantern can be stored and transported with fuel filled and the cap tightened.
It can be used with UCO candle lanterns, as well as other similar candle lanterns such as Big Oak and Northern Lights.
Please set the oil insert using the spring and base included with the lantern.

The wick should be adjusted to 0.5-1.0mm, with a flame height of 20-25mm.
If the wick is extended too much, the flame will become larger and produce soot.
If the fuel is filled too much, the flame may become larger due to the rise in fuel temperature.
In such cases, please reduce the fuel or lower the wick to adjust the flame.

The cap may have minor scratches or dents.
Please be aware of this if you are concerned.
Candle lanterns are not included.

[Materials]
- Bottle body: Glass 40ml (not heat-resistant)
- Cap: Aluminum (Gasket: NBR rubber)
- Combustion fitting: Aluminum (O-ring: FKM fluoroelastomer)
- Wick: Approx. 5mm (100% cotton) with 1 spare

[Usage Precautions]
- Please use fuel at 70-80% of the bottle's capacity.

- Immediately after extinguishing the flame, the metal parts and the top of the bottle will be hot. Please ensure they have cooled down before refilling fuel or attaching the cap.

- During use, do not tip over the lantern or subject it to strong impacts. Also, do not leave the flame unattended.

- Avoid transporting or storing the lantern on its side or upside down, and do not use it in such positions.
If you do not plan to use it for an extended period, please empty the fuel and store it.

- Paraffin oil is used for combustion testing.
We have not tested other fuels, so please use them at your own discretion.
Please do not use highly volatile fuels such as gasoline or alcohol.

- If you feel any danger during use, please stop using it immediately.
We are not responsible for any damages incurred from the use of this product.

- If you have any other questions, please feel free to contact us.