Sold Out, No Restock: UNPLUGGED CP 2-Way Cot HI-KU

This is a popular UNPLUGGED CP cot that can be used in both high and low positions.
While low-style cots may be available, this 2-way model is very rare.
It has been discontinued and will not be reissued.
I have used it about 5 times.
There are some stains, so please check the photos.
One of the legs for high-style use is cracked. It should still be usable, but please judge from the photos.

I believe it originally cost around ¥27,000. I have reduced the price to less than half.

Thank you for your consideration.

Color: Black
Brand: UNPLUGGED CP
Size: 192cm x 35cm x 65cm
Product Weight: 3.8 kilograms
Material: Aluminum, Nylon
■ Setup Instructions: 1. Connect the two 190cm wide poles. 2. Assemble the leg parts x 3 sets (for high style, insert 2 additional extension leg parts per set). 3. Lay the sheet with the logo face down on the floor and insert the pole parts assembled in step 1. Insert the poles into the gaps with the small handles on the edges of the sheet for stability (on both sides). 4. Stand up the sheet with the logo. 5. Attach the leg parts assembled in step 2 from below. *Pay attention to the orientation of the leg parts. 6. Attach the leg parts from above, bending them slightly with your weight. Setup is now complete! For storage, reverse the steps.
■ Size:
- High style deployed: Width approx. 192cm, Height approx. 35cm, Depth approx. 65cm
- Low style deployed: Width approx. 192cm, Height approx. 18cm, Depth approx. 65cm
- Folded: Width approx. 55cm, Depth approx. 18cm
■ Material: Leg parts: Aluminum alloy, Fabric part: 420D Oxford
■ Color: Black
■ Weight: Approx. 3.8kg
■ Load Capacity: 150kg