LEKATO MW-1 Wireless Microphone [Limited Time Offer Until 2/23! Moving Sale!]

Used a few times!
Condition is very clean ◎

MW-01 Receiver
Cell Capacity: 3.7v 400mah
Receiving Sensitivity: -85dbm
Receiving Frequency: 5.8GHz Frequency
Anti-jamming Method: Frequency Hopping
Signal Distortion: <0.02%
Gain: 0 db
SNR: 105db
Frequency Response: 20Hz-20KHz
Latency: <5ms
Sampling Rate: 24bit/48KHz
Output Impedance: 6800
Port Type: XLR Male Port

Transmitter and Receiver Pairing
The default setting for the MW-1 microphone wireless system is channel 1. If you wish to use other channels, please follow these steps:
1. Turn on the receiver and transmitter.
2. Connect the receiver to the microphone and the transmitter to the mixer or other equipment.
3. You can pair the channels of the receiver and transmitter by long-pressing the channel switch button. The signal will be paired when the status indicator flashes blue.
4. Once the pairing is successfully completed, the status indicators on both the transmitter and receiver will turn solid blue.

You can check the battery level of the receiver and transmitter by turning on the unit and the associated channel indicator.

Lekato MW-1 Wireless Microphone System Plug-on XLR Transmitter, 5.8GHz Auto Transmitter Setup for Effects Pedals

#WirelessMicrophone