Conical electric float with tube, set of 2

Thank you for viewing.
This is a listing for a set of 2 modified electric fishing floats.

I often go night fishing and half-night fishing, so I modify commercially available floats to create electric fishing floats.
This time, I have modified a standard acorn float (new) by adding a tube and attaching electric float parts to the top.
For the tube at the bottom, I used a large ball bearing swivel for lures, and a thin wire to fix the float internally. Both are made of stainless steel, so there is no need to worry about rust.

The compatible lithium batteries are BR425 or CR425.
(I think the slightly thinner CR425 will fit better.)

The original buoyancy was No. 1, but I have reduced the buoyancy by adding weights.
The details of the completed floats are described below.
If you are interested, please consider them.

Float top color: Red Green
Body length: 5.2cm 5.8cm
Float top length: 2.6cm 2.7cm
Width: 2.5cm 2.5cm
Weight: 10.9g 11.4g

When only the float and battery are used, there will be a slight difference, but the red part at the top of the float body will be above the water.

The following shows the water surface position with a battery, swivel, and float stopper attached, depending on the weight attached.
Weight B: Only the float top will be visible.
Weight 2B: About 2cm of the float top will be visible.
I believe you will get a little more buoyancy when floating in saltwater.