Accuphase Integrated Amplifier E-306 Sound Output Confirmed

Accuphase Integrated Amplifier E-306 - Sound Output Confirmed.

Dimensions: Width 475 x Height 170 x Depth 418mm (140 size)
Weight: 20.2kg

[Condition]
In recent years, I've been gathering equipment to listen to old records I used to enjoy.

This is an Accuphase integrated amplifier that was released in 1994.

Exterior: There is a slight impact mark of about 2mm on the right side corner of the gold front panel, and several scuff marks can be seen on the top panel. No other major scratches, dents, or rust are visible. The meter surface appears hazy white due to reflections, but it is actually clear.
Interior: There is little dust, and within the scope of my inspection, no signs of burning or rust were found.
Power: Turns on.
Sound Output: Connected to analog disc (PHONO), CD, and LINE1, and confirmed that sound is output from both the R and L speaker channels.
Main Volume: Within the scope of my inspection, there is no crackling.
Please note that due to being in a residential area, I could only test up to about 1/3 of the maximum output to avoid disturbing neighbors.
Balance: No crackling felt.
Buttons: Buttons turn on and off.
Meters: Lamps light up, and the needles move according to the volume.
Remote Control: Cracks are visible on the seal part of the back cover. There are no signs of battery leakage in the battery compartment, and operations such as VOLUME and input switching were possible.
Included: Remote control, power cable (generic)

Note: BALANCED LINE, TAPE-related functions, and SUBSONIC have not been tested.

When the room is dark and the needles move under the meter's illumination, it gives the feeling of listening to analog audio.
Also, the manufacturer's logo part glows blue, which is a nice touch.

I hope someone can use it.