3U Rack Case and AC Power Distributor SRP-D2000

Thank you for viewing.
This is a set of a 3U rack case with a short back and a Sony AC Power Distributor SRP-D2000.
Everything shown in the photos is included.
The 3U rack case is relatively clean, but the AC Power Distributor SRP-D2000 has scratches and dirt. It is in working condition, but as it is a used item, please no claims or returns (NC.NR).
The depth of the rack in the 3U rack case is 20cm from the screw part.
The back has a convenient pocket on the front with a zipper for small items.
The front and back have zippered lids that open fully.
This makes it easy to remove the rack equipment.
Since the front and back open fully, it is possible to use the rack case with the equipment inside.

AC Power Distributor SRP-D2000
- Equipped with A-system (9 outlets for source and control equipment) and B-system (4 outlets for power amplifiers) that are linked to the power switch, and non-linked outlets (3 outlets for equipment with clock/timer, plus 1 on the front panel). A total of up to 14.9A of equipment can be connected.

- A time delay function operates between the A and B systems, protecting speakers and other equipment from noise during power ON/OFF.

- Built-in line noise filter reduces noise from the AC line.

- The remote terminal allows up to 10 units to be controlled by a single power switch.

- Equipped with an AC output off terminal that stops power supply to connected equipment when an emergency broadcast is received.

Main Specifications

- Maximum Rating: A-system 14.9A(*), B-system 14.9A(*), Non-linked 14.9A(*) (Total maximum 14.9A)

- Turn-on Time: A-system approx. 0 seconds, B-system approx. 3 seconds

- Turn-off Time: A-system approx. 6 seconds, B-system approx. 0 seconds

- Emergency Control Signal: DC +24V, 2mA (output cut off at 0V)

- Power Supply: AC100V

- Power Consumption: 24W (0.7W in standby)

- Dimensions: 482 (W) x 44 (H) x 175 (D) mm (excluding maximum protrusions)

- Weight: Approx. 2.8kg