UWA-9PAW with startup adapter

This is an ONKYO UWA-9PAW subwoofer.

It is relatively small for an ONKYO subwoofer, offering flexibility in placement.

We have confirmed that the subwoofer function operates correctly when connected to an AV amplifier.
Functionality for other inputs has not been tested.
There is a dent visible on the woofer's center cap through a gap, but the sound is normal, so it appears to be non-problematic.
The cork feet had peeled off, so we replaced them by cutting and attaching 8mm thick high-resilience tape.

We have cleaned and waxed the unit for this listing, making it reasonably clean. Please understand that there may be scratches and dirt that could not be removed due to use.

Included as a bonus is the following:
This model requires voltage applied to the subwoofer control terminal to power on. Therefore, we are including a modified AC adapter with a 3.5mm jack connected. (Please use this at your own risk, as it was modified by an amateur.)

Power: AC100V, 50/60Hz
Power Consumption: 63W
Maximum External Dimensions: 190 (Width) x 313 (Height) x 353 (Depth) mm
Weight: 8.4kg
Other: Magnetically Shielded Design (JEITA)
Audio Input: 3.1ch Analog Terminal 1 (Center, Surround L/R, Subwoofer)
Input Sensitivity/
Impedance: 500mV/47kΩ (C/SL/SR/SW)
Type: 4-channel amplifier built-in bass reflex, 16cm OMF diaphragm x 1
Maximum Practical Output: 20W x 3ch (Center & Surround L/R, 1kHz, 6Ω/EIAJ)
40W (Subwoofer, 100Hz, 12Ω/EIAJ)
Total Harmonic Distortion: 0.1% (at 5W output)
SN Ratio: 100dB (IHF-A, 0.5V input)

- Brand: ONKYO
- Color: Brown
- Shape: Square
- Feature: Slim Design
- Connection Method: Wired