Fully customized Vestax Handytrax

Thank you for viewing.
This is a fully custom portable turntable.
The Vestax Handytrax has been completely repainted.
*Some paint peeling may be present.

: Equipped with SHURE cartridge, *needle not included
: Carbon straight tonearm,
: LED light,
: On/Off button
*DVS is also possible. 7-inch control vinyl
: Platter stabilizer
This is a stabilizer ring made for the Vestax HandyTrax to reduce platter wobble during scratching.

*Depending on individual differences in the unit and platter, there may be slight interference with the platter.
In such cases, please set it by pressing the platter onto the stabilizer by hand and rotating it until the height of the stabilizer and platter are consistent.

The fader is the top-of-the-line Raiden RXI-F2 - Portable Fader.

Main features of the RXI-F2:
- 3 types of curve selection available
- Fader reverse/hamster option
- Cut lag on both channels 1 and 2 can be adjusted in 0.15mm increments.
- Session mode setting option (Input 1 dual side cut, Input 2 constant pass-through) Standard 2-channel setting similar to RXI-F1.

All functions can be selected on the spot using the fader positions (A left end / B center / C right end) and the calibration button.

The calibration movement has been simplified, making it easier and faster to adjust the fader to your style!

In addition to customizable functions, it also features a durable aluminum body with a flat faceplate that has no steps or screws to avoid interference during scratching.

This fader expands the possibilities of portable scratching with its 2-channel design, stereo output, and built-in headphone amplifier, allowing for more setup configurations and user satisfaction.

The main unit's micro USB jack is used to charge the built-in battery.
Approximately 12 hours of operation on a 1.5-hour charge.