M4A1 Cardboard Art - Movable, Parts Removable

I made an M4 out of cardboard when I was in junior high school. It's my masterpiece.

✨ The stock length is adjustable (photos 3 and 4). As shown in the photos, you can remove the part that stops the stock, insert it into the hole, and it will become longer.

✨ The trigger can be pulled (photo 6).

✨ The selector moves (photo 5).

✨ The rear sight is removable. It's secured with a toothpick, so you can remove it by pulling out the toothpick (photo 7).

✨ The foregrip is removable. It can also be secured by carefully adjusting it with a toothpick (photo 8).

✨ The magazine is removable (photo 9).
→ How to remove it: Press the part in (photo 10), and the part in (photo 11) will pop up, allowing you to remove the magazine. When you release the button, it will return as shown in (photo 12). Be careful not to press too hard.

✨ The charging handle moves.
→→→ When you pull the charging handle, the dust cover opens. There is a string attached to the dust cover, so if you pull it slowly without applying too much force, it should open (photos 13, 14, and 15).

⚠️ Please handle with care, as moving the movable parts forcefully may cause them to break.

It took about 2 months to make, and I would like someone who will cherish it to purchase it.
I will pack it carefully to prevent damage during shipping.

⚠️ Please note that returns will not be accepted for reasons such as breakage.