Eurorack Blank Panel Green 1HP 2HP 3HP 4HP Set of 4

Blank panels for Eurorack cases, sold as a set of 1-4 HP.

The actual color is an average of the images from the second one onwards, appearing slightly dark.

Measured with calipers, the actual dimensions are:
- 1 HP: 5.04mm width
- 2 HP: 10.55mm width
- 3 HP: 15.7mm width
- 4 HP: 20.5mm width

While we've made them slightly narrower than the Eurorack standard of 5.08mm per HP, the 2 HP panels are manufactured slightly wider. The material is corn-derived resin (as module sizes also vary between manufacturers, we don't anticipate this being a significant issue).

The surface has a coarse, matte finish, and the back has faint grid-like lines due to the manufacturing process.

These are not produced using highly controlled molds, so the edges and corners may have some roughness, but they fully meet the requirements for their intended use.

*As this is a resin material, it may deform at environmental temperatures above 60°C (temperatures below 80°C should be fine with ambient temperature alone, as long as it's not direct sunlight).

We do not recommend prolonged exposure to direct sunlight or leaving them in a hot car for extended periods.

The holes are Φ3.2mm, allowing standard M3 screws to fit smoothly.

Category: Other
Color: Green