【Suppressor Mount】Tactical Outer Barrel 11mm Positive Thread for Marui Detonics

◼️◼️◼️◼️[Pong!Kozz] plans, designs, and manufactures airsoft gun parts in compliance with Japanese domestic laws and regulations◼️◼️◼️◼️
This is a tactical outer barrel with an 11mm reverse thread muzzle for the Marui Detonics.

The inside of the muzzle tip is molded with an 11mm female thread, which is widely used for attaching silencers and tracers.

The design omits the gimmick of lowering the rear of the chamber, which mimics the short recoil action of a real firearm, so the blowback is smooth even when a silencer is attached.
The silencer will point straight forward when the slide is closed.

A protrusion is molded near the tip of the inner barrel to tighten it.
The muzzle side of the barrel's tapered shape has been tightened to reduce play between the outer barrel and the slide when the slide is closed.
The method of fixing the inner barrel is the same as the genuine part, but an M4 thread is molded to allow for fixing with a grub screw from the bottom as an auxiliary.
M4 grub screw included.

●●●●Please Note●●●●
As this product is made of resin, it may break if subjected to strong impacts, such as hitting it while a silencer is attached.

Manufactured by a major 3D printing service, MJF/PA12 resin, black dyed.

The airsoft gun body, silencer, etc., shown in the photos are not included.

[Please Note]
While we aim for a no-modification installation, some fitting adjustments may be necessary.
Please understand that we cannot provide any guarantees or compensation for any issues that may arise during installation or use. All responsibility lies with the user.

*The photos used are for the same product and may differ in detail from the actual item.
Thank you for your understanding.

●●●This is for direct sales on Yahoo Auctions and Mercari only.
Please be aware of fraudulent resale sites.●●●

Silencer Suppressor Tracer 11mm CW