Easy Gas Blowback Conversion Kit for Marui 1911 / Hi-Capa (Gas Blowback)

◼️◼️◼️[Pong!Kozz] plans, designs, and manufactures airsoft gun parts in compliance with Japanese domestic laws and regulations◼️◼️◼️
This is a custom parts kit to convert Tokyo Marui blowback gas guns of the 1911 and Hi-Capa series into cocking gas guns (commonly known as gas-cocking).
Gas-cocking, which was a custom for experts due to its troublesome process, can now be easily used by simply installing this kit.
(Not compatible with D.O.R., M45A1, V10. Detonics requires a separate dedicated product.)
After installation, the slide must be operated each time for loading and firing.
By not blowback, the shooting silence is improved. Gas consumption is also greatly reduced, and the gas pressure required for operation is low, allowing use even in very low temperatures.

No modification to the main unit, such as bolt-on replacement, removal of the knocker lock, processing of the cylinder, or cutting and adjusting the hammer spring, is required. No troublesome processing or adjustment of genuine parts is necessary.

Manufactured on a commercial machine at a major 3D printing service, made of PA12 resin, and dyed black.
Replace the entire slide interior and piston (breech) assembly with the corresponding genuine parts. The mounting screws will be reused from genuine parts.

The dedicated hammer SP plunger, which creates play so as not to fully depress the valve when the hammer is down, must be replaced and used.
(Please refer to the photo.
The hammer spring, its housing, plunger, etc., shown in the product photos are not included.)

● The blade-shaped part below the nozzle is weak against vertical stress, so please refrain from overfilling the magazine with BBs or forcefully inserting the magazine.
● Minor adjustments may be necessary depending on individual differences.
● Designed for installation in the genuine state.
Depending on the combination with other parts or tuning, the muzzle velocity may become too high.
Please ensure confirmation and adjustment.
● Although we sell after repeated testing, installation and use are at your own risk.
● Photos are reused for the same product, so details may differ from the actual item.
● For cost reduction, multiple parts are integrally molded.
Please separate them for use.
Dye the cut edges with an oil-based marker.

●●● For direct sales on Yahoo Auctions and Mercari only.
Please be aware of fraudulent resale sites. ●●●