2-Piece Set (Type-A) Anti-Rotation Holder for IC-705 Handheld Antenna

This holder prevents the handheld antenna from rotating when attached to the ICOM IC-705 via a BNC L-shaped connector.
Designed for easy attachment and use of handheld antennas when you want to operate briefly on 144/430MHz during mobile operations.
It suppresses antenna rotation and makes casual operation more comfortable.
*There are Type-A and Type-B depending on the shape of the BNC connector. Please be sure to check About BNC Connectors [Important].

■ Set Contents
Includes two types of holders that can be used according to your scene.

[Upright Type]
Suitable for use when placing the IC-705 on a flat surface such as a desk.
The antenna is designed to stand upright relative to the main unit.

[Angled Type (approx. 18°)]
Suitable for use when tilting the main unit forward with a mini tripod or stand.
The antenna is designed to be angled at approximately 18° relative to the main unit.

*Radio unit, BNC connector, and antenna are not included.

■ About BNC Connectors [Important]
This product is designed to be used with BNC L-shaped connectors that have a square box on the back.
If you have a connector without a box, please check Type-B.

This product is designed based on the following dimensions:
- From the base of the radio connector to the rear of the box: approx. 27.1mm
- Width of the L-shaped connector elbow (the box part): approx. 11mm

If the dimensions differ, it may not be attachable.
Reference Connector Used
MISUMI NF70E8-NR5
(Photo reprinted from MISUMI's website)

■ Precautions
- Since the antenna is directly attached to the BNC connector, please avoid using heavy antennas or operating in strong winds.
- This product is an accessory for casual operation. Excessive force or unexpected use may cause damage.
- As it is 3D printed, there may be surface unevenness or small burrs.
- The shape and structure may be revised for improvement.

■ Photo Description
1st image: Image of upright type in use
2nd image: Image of angled type in use
3rd image: Product (2-piece set)
4th & 5th images: Examples of upright/angled type installation (red prototype used for clarity. Actual product is black)
6th image: BNC connector used (NF70E8-NR5) *Not included in the product

#ic705